We have invested in extensive MIL-STD and other Industry Standards testing to prove that our products can meet the demands of the harsh training environments in which they are installed. The bottom line is that our product is the most tested and proven product on the market. You can rely on the performance and our ability to provide a long-lasting durable solution.
|Testing Criteria||Test Name||Results and Significance|
|Operational Temperature Range
-20F to 140F
B(25 cycles)-Humidity and
|PASS: P.I.R.A.T.E withstands the Humidity and Freezing extremes of this test and can withstand harsh environment. Withstands temperature range of -65 to 267 degrees Fahrenheit.|
|Non-Combustible Flammability||ANSI/NFPA 225, ASTM
E84-97A, UL 723, NFPA 101
|Pass: CLASS A, UBC Class 1 with Flame Spread Less than 0-25, UnderSection 803 and 803.1 P.I.R.A.T.E will not support a flame and is self extinguishing.|
|Windstand High Humidity||MIL-STD-810D Method
506.4 – Drip
|Pass: P.I.R.A.T.E was subjected to a rain test in accordance with the procedures of MIL-STD-810F.
Method 506.4. P.I.R.A.T.E was compliant to this requirement. No anomalies were noted. P.I.R.A.T.E conforms to the requirements of MIL-STD-810F,Method 504.
|PASS: P.I.R.A.T.E was subjected to an Immersion test ion accordance with the procedures of MIL-STD-810F, Method 512.4. P.I.R.A.T.E was compliant to this requirements of MIL-STD-810F. No anomalies were noted. P.I.R.A.T.E conforms to the Immersion of MIL-STD-810F,Method 512.4.|
|Windproof/Waterproof||MIL-STD-810 & Telcordia/Verizon – Wind
Driven Rain specification
|Pass: Withstand rain and wind exceeding 100 MPH. Product not effected by testing, includes hose down, pressure wash, depth immersion, and condensation drip.|
|Windproof/Durable||MIL-STD-810F Blowing Sand, Dust &
|Pass:P.I.R.A.T.E was subjected to a Sand and Dust test in accordance with the procedures of MIL-STD-810F, Method 510.4. P.I.R.A.T.E. was compliant to this requirement. No anomalies were noted. Conforms to the Sand and Dust Requirements of MIL-STD-810F, Method 510.4.|
|Fade Resistant ￼||￼ Fade Resistance:
Xenon, UVA, UVB.
|Pass: Best available simulation of full-spectrum sunlight available because it includes ultraviolet, visible and infrared light. Filtered xenon arc lamps are the best way to test the light stability of products, such as pigments, dyes and inks, which are sensitive to the long-wave and visible wavelengths of sunlight. Test reproduced the damaging wavelengths of light encountered either indoors or outdoors.|
|Additional Testing￼||￼MIL-STD-810 & RTCA/DO 160
– Environmental Contaminants
|Pass: Can withstand common contaminants of interest including cleaning agents, lubricants, insecticides, and fuel oils and many types of solvents.|
|Additional Testing￼||￼DoD Range Laser Safety
|Pass: Laser safe and certified by the DoD Range Laser Safety Review Board.|
|Additional Testing￼||￼Secular Hazard Analysis(USMC)
|Approved by the Laser Systems Safety Working Group 20-22 April 2010 for use in Marine Corps Ranges and Training Areas.|